Peppermint Kisses

 Hi everyone!

I hope you are doing well!

Today I wanted to stop by to share a sweet little Christmas card that I made using a super cute image from Digi Doodle Studios called Jingle Jay.

Look how sweet he is!

I started my card by first creating my card base by trimming down some striped patterned paper and covering my white A2 card base. I added a red strip in the middle and added some doodling lines around the perimeter. I printed out my Jingle Jay image onto a piece of white cardstock and colored the image in with my Copic markers. I used a die to cut it out and then used the die again to cut out the red glitter frame. I added the scroll frame to my card and then layered my image inside so that it nested inside my frame. I finished my card with a few gems, some white doodles and some clear wink of stella inside the lantern. 

Copic Colors Used:

Skin: E50, E51, E21

Hair: E31, E33, E35, E37

Greens: G43, G46, G29

Reds: R29, R39

Yellow: Y00, Y13

Grays: C00, C0, C1, C2, C5

I would also love to play along in the following challenges:

--Passion For Markers: #818 Mega Christmas Add A Sentiment--

--Addicted To Stamps: #507 Christmas--

--Merry Little Christmas Challenge: #65 Anything Christmas Goes--

&

--Die Cut Divas: December Christmas/Winter--

Thank you so much for stopping by my blog and taking a look at my latest creation!

I really appreciate it!

I hope you have a great crafty day!

Products Used:

• Cardstock: White (Hammermill), Red Glitter (Recollections)
• Patterned Paper: Christmas (Recollections)
• Image/Sentiment: Jingle Jay (Digi Doodle Studios)
• Dies: Christmas (Recollections)
• Misc.: Gems, Black Micron Pen, Glossy accents, White Paint Pen, Copic Sketch Markers

Warm Cocoa Wishes!

 Hi everyone!

I hope your day is off to a fabulous start!

Can you believe we are in December already?? 

I'm pretty sure that the older I get, the faster time goes by haha!

I wanted to stop in and share a fun little treat pocket that I created for someone, 

as well as playing along with a few challenges. 

Here is a look at my project...

Super cute right??

This adorable image is called Sophie Mae Christmas and she is a newly released digital stamp from Digi Doodle Studios. As soon as I saw her, I thought she was so incredibly cute and had to have her haha!

Here is how I created my cocoa holder...

I started by creating my base by using an envelope die from Jaded Blossom, scoring the sides and bottom to create a "box/pocket" and cutting off the top flap from the envelope that would end up being in the front. I don't really remember the exact measurement of the score lines, I placed my cocoa packets on top and scored accordingly. Before gluing the box together, I adhered my patterned paper to make it a bit easier. 

I printed out Sophie Mae Christmas onto a piece of white Hammermill cardstock and colored her in with my Copic markers. Once I had her colored, I fussy cut her out and added some white flocking powder to her little hair pom. I decided to add a little more dimension, so I printed her out again, colored her mitten and coffee cup, fussy cut it out and added to that my image with foam tape to give a little 3D look to the image. I die cut a scallop circle and layered my sentiment underneath, adding both to the front of my pocket. I popped up my image with more foam tape and added some snowflake sequins and Nuvo drops around her. I finished my project by creating a double bow and adding some festive bells to the center. 

Copic Colors Used:

--Skin: E50, E51, E21--

--Hair: E31, E33, E35, E37--

--Outfit: C00, C0, C1, G40, G43, G46--

--Boots: E31, E33--

I would also love to play along with the following challenges:

--Cupcake Inspirations: #632 Let It Snow--

--Caffeinated Christmas Challenge: #48--

--A Cut Above: December Challenge: AG w/a diecut--

&

--Simon Says Monday Challenge: Use Dies--

Thank you so much for stopping by today and taking a look at my latest creation!

I really appreciate it!

I hope you have a great crafty day!

Products Used:

• Cardstock: White (Hammermill)
• Patterned Paper: Santa Stops Here (Bella Blvd.)
• Image/Sentiment: Sophie Mae Christmas (Digi Doodle Studios)
• Dies: Envelope Dies, Scallop Circle Dies, Mini Tag Dies 3 (Jaded Blossom)
• Misc.: Copic Sketch Markers, Snowflake Sequins, White Nuvo Drops, White Blizzard Nuvo, Stitcky Back Pearls, Flocking Powder, Jingle Bells, Foam Tape

A Latte Warm Winter Wishes!

Hi everyone and happy happy Friday!! Yay!!

I'm popping in today to share a super sweet winter themed card.

Here is a look at my card...

How sweet is that little snowman from Digi Doodle Studios? 

I printed him out onto some white Hammermill cardstock, cut him out using my Scan N Cut and then colored him in with my Copic markers. I set him aside while I worked on my card design. I created a white A2 top folding card and layered two pieces of paper on top that I had die cut out with a stitched rectangle die. To give the layers a bit of separation, I added a thin strip of green paper in between. I die cut a scallop rectangle and added that to my card, trying to center it as best as I could. I stamped my greeting underneath with some black Versafine ink. I popped up my image, Cocoa Charlie Freeze Snowman, with foam tape and added some white details with a white paint pen. I finished my card by adding some snowflake sequins, pearls and white Nuvo drops. 

I think this is so cute!

Copic Colors Used:

--Snowman: B0000, N5, YR14, R00--

--Clothes/Hat: N3, N5, N7, R39, R89, B91, B93, B95, B97, G94, G99--

--Coffee: E23, E25, R37, R39, R89--

--Fox: E13, E17, E19, E40, N5, R000, R00--

I would like to enter my card into the following challenges:

**2025 Fall Winter Coffee Lovers Blog Hop**

**Caffeinated Christmas Card Challenge #47**

**I {heart} Promarkers: #594 Anything Goes and/or Animals**

&

**The Paper Funday Challenge: #82 Anything Goes option of Merry & Bright**

Thank you so much for stopping by my blog today and taking a look at my latest creation!

I appreciate it so much!

I hope you have a great crafty day!

Products Used:

• Cardstock: White (Hammermill)
• Patterned Paper: Winter Fun (Echo Park)
• Image: Cocoa Charlie Freeze Snowman (Digi Doodle Designs)
• Sentiment: Happy Brew Year (Jaded Blossom)
• Dies: Stitched Frame Dies (My Creative Time), Scallop Rectangles (Gina Marie Designs)
• Misc.: Copic Markers, Foam Tape, Flat Back Pearls, White Nuvo Drops, White Paint Pen, Glossy Accents

You Made The Nice List!

Hi everyone!

I hope your Tuesday is off to a great start!

Today I am popping by to share an adorable Christmas card that I created, with a few challenges in mind. I will link the challenges that I am entering below :) 

Here is a look at the card that I created...

Digi Doodle Studios recently released some fun new images and they are oh so cute!! 

I saw this image called Cherry Peppermint Winter Bunny and thought she would be so fun to color and create a card with!

I printed out my image onto a piece of white Hammermill cardstock and used my Scan N Cut to cut her out. Once she was cut out, I colored her with my Copic markers. I created my cardbase with some white cardstock and added a strip of striped paper down the middle. I added some die cut scallops to each side to help frame my striped paper just a bit. I die cut a Stitched Arch using more white cardstock, stamped my sentiment and added a green thread bow and adhered it to my card. I popped up the Cherry Peppermint Winter Bunny with some foam tape and added some white Nuvo Drops to finish my card. 

So cute!!

Copic Colors Used:

Bunny: T0, T2, T4, R81, RV00, RV000

Outfit: CC00, C0, C1, R24, R27, R29, R39

Gift: C00, C0, YG25, YG17, R29

Challenges I would like to enter:

--Aud Sentiments: #331 Glitter And/Or Christmas + Sentiment--

--A Cut Above: November 2025--

--Peace On Earth Christmas: November (#99)--

&

--Colorful Options: November 2025--

Thank you so much for stopping by my blog today and taking a look at my latest creation!
I really appreciate it!

I hope you have a great crafty day!

Products Used:

• Cardstock: White (Hammermill), Chili Pepper (Lawn Fawn)
• Patterned Paper: Milk & Cookies (Doodlebug Design)
• Image: Cherry Peppermint Winter Bunny (Digi Doodle Studios)
• Sentiment: Itty Bitty Holiday (MFT)
• Dies: Stitched Arch Dies & Border Dies (Jaded Blossom)
• Ink: Onyx Black Versafine
• Misc.: Foam Tape, White Nuvo Drops, White Gel Pen. Wink Of Stella, Glossy accents, Crochet Thread, Copic Sketch Markers

 

Trick Or Treat!

 Hi crafty friends!

I hope you are having a fabulous day!

I'm back today sharing one last Halloween project for this season. 

Halloween and Christmas are definitely my favorite holidays to craft for so while I'm sad my Halloween crafting is coming to an end for this year, I'm happy Christmas crafting is right around the corner!!

Here is a look at the fun treat bag that I created to share with you today:

I started by creating my bag by using a Scallop Caddy die from Jaded Blossom and some bright patterned paper from Doodlebug Designs. Once I had my bag assembled, I set it aside and started working on my focal piece. I printed out this cute digital stamp from Digi Doodle Studios called, Pippa Pumpkin Phantom and colored it with my Copic markers. I fussy cut it out using some scissors and popped it up onto two circles that I had layered together. I added my circle piece onto the front of my bag and added a sentiment that I trimmed out from the patterned paper pad underneath. I added a few white dots onto the banner that the little ghost is holding, and placed some star confetti pieces and a few Nuvo drops around him. I finished my bag with a fun double bow.

I placed a small velcro dot to the inside to hold the box shut.

So adorable!!

Copic Colors Used:

--Ghost: BG0000, BG000, RV000--

--Pumpkin: YR02, Yr04, YR14, YR18--

--Banner: Y13, YG05, RV17--

I would also love to play along with the following challenges:

**Crafty Catz Challenge: #703 Anything Goes with twist of Halloween**

**Love Those Pretty Papers October Challenge: Halloween Colors**

**Inkspirational Challenge #353: Seeing Stars**

&

**Lil Patch Of Crafty Friends #264 Anything Goes**

Thank you so much for stopping by today and taking a look at my latest creation!

I really appreciate it!

I hope you have a great crafty day!

You can find me on Instagram here

Products Used:

• Cardstock: Black & White (Recollections)
• Patterned Paper: Hey Pumpkin (Doodlebug Designs)
• Image: Pippa Pumpkin Phantom (Digi Doodle Studios)
• Dies: Nesting Circles (WRMK), Blueprints 27 (MFT), Bow Dies & Scallop Caddy Die (Jaded Blossom)
• Misc.: White Blizzard Nuvo, Confetti Stars, Foam Tape, Velcro, Copic Sketch Markers, White Gel Pen

Spooky Salutations!

Hi everyone!

I hope you are all having a fabulous day so far!
I wanted to pop in real quick and share this super cute Halloween card that I made with a few challenges in mind!

Here is a look at the card...

This card is so fun! I purchased this die a couple of years ago and never got around to playing with it! I actually forgot all about it until I was trying to organize one of my stamp bins, came across it and knew I needed to play with it right then! The fun thing about this die is that the head is adhered to the card but the body hangs on the foam circle holding the head so the body actually swings! I could not get a picture or video of it, I tried and tried but none of them came out. I am so sorry about that!

I created my card by covering my A2 top folding card front with some Halloween themed patterned paper. Once it had it covered, I die cut a piece of green patterned paper and added that to my card front as well. I created my little Dancin' Grim, added him and placed a sentiment strip underneath him. I added some confetti stars, Nuvo drops and a bit of doodling and finished my card with some black cording tied into a fun little bow. 

The challenges I would like to play along with are:

--Love Those Pretty Papers Challenge: October (Halloween Colors)--

--Two Old Bats Halloween Challenge: October 2025--

&

--Make My Monday: #263 Halloween Colors--

Thank you so much for stopping by my blog today and taking a look at my latest creation!

I appreciate it so much!
I hope you have a great crafty day!

Products Used:

• Cardstock: White (Park Lane), Halloween (American Crafts), Kraft (Pen Gear)
• Patterned Paper: I Love Halloween (Echo Park)
• Dies: Dancin' Grim (Spellbinders), Hip Hip Hooray (MFT)
• Misc.: Hemp Twine, Reverse Spooky Salutations Sentiment Strips (SSS), Star Confetti, White Blizzard Nuvo

 

A Merry Little Christmas!

Hi crafty friends!

I hope you are having a fabulous day!

I'm so happy to be back as a guest designer for Digi Doodle Studios!

Digi Doodle Studios is a digital stamp company that has some of the cutest images!!  There is so much versatility with how big or small you want your image to be with digital stamps, not to mention the storage space saved in my craft room lol!

Here is a look at the card that I created to share with you today:

Isn't this image, Snowdrop & Niblet, so cute?

I started by creating a white A2 top folding card and covering the front with some snowflake patterned paper. I colored my Snowdrop & Niblet image with my Copic markers, fussy cut it out and set it aside while I worked on my card. I used a scallop frame die to cut out my frame, cutting the outer scallop portion out 3 times to give some dimension. I placed the inner frame onto my card front and layered my Snowdrop and Niblet image on top. I created a hill from some stitched border dies, stamped my sentiment and adhered it to the backside of my scallop frame. I added my frame to the front of my card and added a bit of glitter to the hills and leaves. I decided to do a little fussy cutting to the present for a little interest so I found some patterned paper that coordinated with the colors that I had colored my image, ran it through my printer, cut it out and glued it to my present. I finished my card with a bit of hemp cording that I tied into a bow and some white gel pen accents.

 

I think this is just adorable!! I can't help but smile when I look at this cute image!

Copic Colors Used:

Bunny: W0, W1, W3, R000, R00, R01

Coat/Hat/Scarf: R81, R83, R56, C0, C1

Greenery/Berries: YG61, G82, G85, R37

Bird: R35, R37, R39, YR24, C00, C0, C1, C2, C5

Snow: BG0000, BG000

I would also love to join along in the following challenges:

--{BYSHC} Falling For The Holidays 2025 Linky Party--

--Simon Says Stamp Wednesday Challenge: Christmas--

&

--{Cupcake Inspirations} #629: What makes You Smile--

Thank you so much for stopping by my blog today and taking a look at my latest creation!

I really appreciate it!
I hope you have a great crafty day!

Products Used:

• Cardstock: White (Hammermill)
• Patterned Paper: Snowflakes is from Christmas by Recollections, Scrap for the gift is from Merry Little Christmas (My Mind's Eye)
• Ink: Versafine Onyx Black
• Stamps: Image: Snowdrop & Niblet (Digi Doodle Studios) & Sentiment: Secret Santa (MFT)
• Dies: Gallery Frame #2 (Hello Bluebird), Border Dies 2 (Jaded Blossom)
• Misc.: Hemp Cording, Glitter, White Gel Pen, Copic Sketch Markers

Gingerbread Christmas Cards

Hi everyone!

Happy Friday!! I hope you are having a great day so far!

Today I wanted to pop in and share a couple of simple cards that I made for a couple of different challenges.

The challenges that I would like to enter are:

*Simon Says Stamp Wednesday Challenge: Bright and Colorful*

*Krafty Chicks Challenge: #789 Christmas*

&

*Freshly Made Sketches: #707*

Here is a look at the cards that I created...

Cute right?? I fell in love with this stamp set as soon as I saw it!

First I created my card front using the above sketch as my inspiration on how to lay out everything. I decided to cut some thin strips of white cardstock and glue them on top of my patterned papers so that I could add a little separation. I colored my little gingerbread from the Gingerbread Joy stamp set from Simon Says Stamp with my Copic markers and used the coordinating dies to cut it out. I placed it into the center of my circle and added the sentiment underneath. I added some glitter the the gumdrops on the gingerbread and placed some enamel dots and hearts to finish my card. 

While I had everything out, I decided to make a second card.

I made this one the same way, just used different patterned papers and a different image/sentiment.

I thought that sentiment was absolutely perfect to go along with that image haha!!

So cute!!

Copic Colors Used:

Gingerbread: E40, E41, E42, E43, R20

Cup: B00, BG53, BG57, E23, E25, E29

Candy/Sprinkles/Icing: W0, W1, R81, R24, R27, YG03, YG07

Thank you so much for stopping by today and taking a look at my latest creation!

I appreciate it so much!

I hope you have a great crafty day!

Products Used:

• Cardstock: White (Hammermill), Vellum
• Patterned Paper: Christmas Town (Doodlebug Designs)
• Stamp: Gingerbread Joy (Simon Says Stamp)
• Dies: Gingerbread Joy (Simon Says Stamp), Nesting Circles (WRMK), Blueprints 27 (MFT)
• Ink: Memento Tuxedo Black
• Misc.: Enamel Dots, White Paint Pen, Enamel Hearts, Foam Tape, Glitter, Clear Wink Of Stella, White Nuvo Drops, Black Jelly Roll Pen

Stellar Birthday!

 Hi everyone!

I hope you are having a fabulous day so far!

Today I am popping in real quick to share a card that I created with a couple of challenges in mind. 

Here is a look at the card...

I purchased this adorable image called Ainsley Astronaut  from Digi Doodle Studios a couple of weeks ago, colored her up with my Copic markers and set her aside! You know how that goes right? You just get busy with other things, or is that just me? haha! Well, I came across her when I was cleaning off my desk and sat down and turned her into a card before I forgot again haha!

I started with a white A2 top folding card base and added a light purple strip towards the bottom and doodled around the perimeter of my card front. I did a little ink blending to create a galaxy background and added some white and gold paint splatters. Once my galaxy was dry, I used a scallop rectangle die to cut it out and placed it onto my card, centering it as best as I could. I cut out my astronaut using my Scan N Cut and popped her onto my card with some foam tape. I cut out my sentiment using a banner die and placed that underneath her, trying to align it with the purple strip that is behind the background panel. I die cut some stars, placed them onto my card and added a few white doodles to her outfit to complete my card. 

I think this turned out so cute!!

Copics Used:

Skin: E50, E51, E21, R20

Hair: E31, E33, E35

Outfit: V12, V15, C0, C1, C3, C5

The challenges that I would like to enter are...

*Seize The Birthday: Anything Goes*

*Simon Says Stamp Wednesday Challenge: Bright and Colorful*

 *Digi Choosday Challenge 10, WK 2: Anything Goes*

&

*A Cut Above: October Challenge (Anything Goes with a Die Cut)*

Thank you so much for stopping by today and taking a look at my latest creation!

I appreciate it so much!

I hope you have a great crafty day!

Products Used:

• Cardstock: White (Hammermill), Purples (Recollections)
• Inks: Squeezed Lemonade, Picked Raspberry, Seedless Preserves and Peacock Feathers Distress Oxide Inks
• Stamps: Ainsley Astronaut Girl (Digi Doodle Studios)
• Dies: Scallop Rectangle Dies 2, Embellishment Clusters (Jaded Blossom) & Blueprints 27 (MFT)
• Misc.: Black Micron Pen, Gold Metallic Watercolor, White Acrylic Paint, Foam Tape, Glossy Accents

Let It Snow with The Greeting Farm!

 Hi everyone and happy Tuesday! 

 I am back to share one last post as September's Guest Designer for The Greeting Farm!

A huge thank you to The Greeting Farm for having me! It has been an absolute privilege!

For my card today, I wanted to use one of the new stamps released this month, Holiday Anya 13.

Here is a look at what I created...

I think she is just the cutest...and her little companion?? Cutest penguin ever!!

I decided to go with more of a winter themed card and it was super easy to do, just by simply changing up the sentiment. I stamped my image from the Holiday Anya 13 onto a piece of white Hammermill cardstock and colored her in with my Copic markers. I decided to do a little paper piecing, so I stamped her onto 2 pieces of patterned paper scraps so that I could give a little interest to her jacket, skirt and hair bow. 

Copic Colors Used:

Skin: E50, E51, E21, R20

Hair: YR20, E31, E33, E35

Headband/Boots/Jacket Fluff/Mitten: C00, C1, C2, BG57, BG49, RV34

Penguin: V12, V15, V17, C00, C0, C1, C2, C3, C4, C6, R00, YR21

I cut her out using the Scan N Cut and set her aside while I worked on my card.

I created an A2 top folding card and covered the front with some light blue patterned paper and added a "snowy" hill. I cut a piece of striped patterned paper out using a scallop rectangle die and then created an opening in the middle. I stamped my sentiment using an older stamp set titled, Let It Snow* onto a piece of white cardstock and used the same dies to cut it out so that it would layer perfectly onto my striped panel. I popped up my striped panel with foam tape and added my Holiday Anya 13 with more foam tape to create a little dimension in my scene.

*While Let It Snow is currently not available at the moment, it can be requested for a future Farmers Market using the Contact Page on the store site.

I completed my card with a few snowflake sequins and some white Nuvo drops!

I think they are both so adorable!

Thank you so much for stopping by today!

I really appreciate it!

I hope you have a great crafty day!

You can find me on Instagram here

Supplies Used:

• Cardstock: White (hammermill)
• Patterned Paper: Winter Wonderland (Doodlebug Designs)
• Stamps: Holiday Anya 13 & Let It Snow (The Greeting Farm)
• Ink: Memento Tuxedo Black
• Dies: Border Dies 2 & Stitched Arch Dies (Jaded Blossom), Blueprints 27 (MFT)
• Misc.: Foam Tape, Snowflake Sequins, White Nuvo Drops, Glossy Accents, Clear Wink Of Stella

September Mini Release

Happy Thursday! 

It's time for our new mini Sept release over at Jaded Blossom! 

We have a few new items available! Check them out HERE

Here is what I made using the new items...

 

For my first project, I decided to go with a Thanksgiving/Thankful themed card.

I created an A2 top folding card using some Kraft Cardstock. I used the Rectangle Dies 2 to cut out another piece of Kraft Cardstock, layering that on top of my card base & stamping the sentiment from the Friendsgiving stamp set onto the bottom right corner with some brown ink. I used the Card Layer Dies 2 to cut out a sheet of plaid patterned paper to get my diagonal piece, layering a piece of white and brown cardstock onto it that I cut out using the Border Dies. I popped it up onto my card with some foam tape and added some leaves that I cut out using the Street Lamp Die: Fall Add Ons.

I finished my card with some doodling, enamel hearts, Nuvo drops and some gems.

For the inside of the card, I used the extra diagonal piece that the Card Layer Die 2 cut out and added a brown scallop that I cut out using the Border Dies. I stamped my greeting using the Sunflowers For Sale stamp set, added more doodling and some leaves from the Fall Embellishment Clusters.

For my second project, I couldn't resist making a fun Halloween themed card. 

For this card, I started by creating the background for my scene. I used the Stylized Rectangle Dies and cut out two pieces of cardstock, one purple and one green.  I used the Spring Dies to cut out my grassy edge and added that to my purple cardstock, layering a fence that I cut out using the Halloween Scenic Dies in between my grass pieces. I added my background to a white A2 top folding card and began building my adorable little witch! I created her using the Girl Gnome Dies and the Gnome Dies: Halloween Costume Add Ons 2 and placed her onto my card, letting her foot hang off of the scene just a bit. I cut some clouds using the Spring Dies 2 & Gnome Dies: Weather Add Ons and added those to my card. I created my street lamp by using the Street Lamp Die, Street Lamp Die: Valentine Add On and the Haunted Highway stamp set. I placed it onto my card, allowing the top to hang off of the scene a bit as well. I finished my card by adding some bats from the Halloween Embellishment Clusters.

And we have the Bundle at a Discount! Only $75.99. Regular Price $85.99 

We also have a freebie item - see details below on how to qualify.

Make sure to check out all the design team projects by clicking on their names below.

Lee-Ann

Cindy

Rosemary

Stacey

Cynthia

Jamie

CLICK HERE TO SHOP

Thanks so much for stopping by today!!

I appreciate it so much!

I hope you have a great crafty day!

Products Used:

Thanksgiving Card

Jaded Blossom Products:

• Friendsgiving 
• Street Lamp Die: Fall Add Ons 
• Rectangle Dies 2  
• Border Dies  
• Card Layers Die 2  
• Fall Embellishment Clusters 
• Sunflowers For Sale 

Cardstock: Kraft (Pen Gear), White (hammermill)

Patterned Paper: Pumpkin Spice & Dot-Stripe Rainbow (Doodlebug Designs)

Ink: Potting Soil Archival (Ranger)

Misc.: Foam Tape, Brown Micron Pen, Gold Nuvo Drops, Brown Gems, Enamel Hearts

Halloween Card 

Jaded Blossom Products:

• Haunted Highway
• Halloween Embellishment Clusters 
• Girl Gnome Dies
• Gnome Dies: Halloween Costume Add Ons 2
• Halloween Scenic Dies
• Spring Dies
• Spring Dies 2
• Gnome Dies: Weather Add Ons
• Street Lamp Die
• Street Lamp Die: Valentine Add On
• Stylized Rectangle Dies

Cardstock: White (Hammermill), Perfect Plum (SU!), All Others (Recollections)

Patterned Paper: I Love Halloween (Echo Park Paper), Gingham-Linen Rainbow (Doodlebug Design)

Ink: Versafine Onyx Black

Misc.: Foam Tape