Happy Halloween

Hi everyone!

I hope your day is off to a fabulous start!

Today I have a mini slimline to share with you that I made using some adorable stamps from

 Ink N Splatter!

 I started by creating my mini slimline base from some gray cardstock & added a purple scallop layer on top. Next was the fun part, the building of my scene! I stamped my bunny and then masked her off before stamping the bat and mouse. I added a mask to them as well and then using the Cloudy Day Stencil, I inked up a sky of purple clouds and some metallic watercolor splatters. Once I had the sky done, I added a thin layer of green along the bottom with some green ink. I removed the masks and colored my images from the Sweet & Spooky stamp set with my Copic markers. I added a moon that I die cut out with a circle die and then used a dot frame to cut out my image panel. I added some grass with a couple of different green Copics before popping it up onto my card front with some foam tape. I added a few more stars with my white gel pen and stamped my greeting using the Ghostly Haunts stamp set and added it to my card with more foam tape. So cute!

Copic Colors Used:

--Bat: R39, R59, C0, C1, C2, C6, YG03, R00, R000--

--Bunny: W0, W1, W3, W5, R20, R01, R00, YG05, YG03, 100, N5, N3--

--Mouse: R59, R39, C6, C5, C4, C3--

--Pumpkins/Candy: YR16, YR14, YR12, E44, B63, Y23, YR21, BG13, RV14, YG61--

--Grass: YG61, YG63, E43--

Thank you so much for stopping by my blog today and taking a look at my latest creation!
I really appreciate it!

I hope you have a great crafty day!

Ink N Splatter Products:

• Sweet & Spooky Clear Stamp Set
• Ghostly Haunts Clear Stamp Set
• Cloudy Day Stencil

Other Products Used:

• Cardstock: White (Hammermill), Gray & Purple (Recollections)
• Inks: Memento Tuxedo Black, Milled Lavender, Peeled Paint, Tea Dye, Squeezed Lemonade Distress
• Dies: Circles (WRMK), Mini Slimline (Spellbinders), Fishtail Foundations (MFT)
• Misc.: Foam Tape, Starry Colors Watercolor, White Gel Pen

Pumpkin Pickin'

 Hi everyone!

I hope your Monday is off to a wonderful start!

I'm back today with my final post as a guest designer for Jaded Blossom!

Here is a look at what I created to share with you today:

I adore this little scarecrow and thought it would be so cute to put onto a little treat box. 

I started by creating my box using the Milk Carton Die and some Kraft cardstock. I layered some light aqua patterned paper on all the sides. I used some green patterned paper and the Border Dies 2 to create my little hills, added my sentiment from the Scarecrow Kisses stamp set and attached my hills to the front of my box. I used the Spring Dies 2 to create my cloud and added some little pumpkins that I created using the Fall Banner Dies. I stamped my scarecrow from the Scarecrow Kisses stamp set and colored him with  my Copic markers. Once I had him colored, I fussy cut him out and added him with foam tape. I created a double bow using the Bow Dies to close my box.

I adhered a twist tie to my bow so that the box would be easy to open and close without the bow getting ruined. As it gets closer to giving this little box away, I plan to fill it with some little pumpkin mellowcremes and harvest corn candies. Adorable!

Thanks so much for stopping by today!

I hope you have a great crafty day!

Products Used:

• Jaded Blossom: Bow Dies, Spring Dies 2, Border Dies 2, Fall Banner Dies, Milk Carton Dies, Scarecrow Kisses
• Cardstock: Kraft (Pen Gear), White (hammermill)
• Patterned Paper: Pumpkin Spice (Doodlebug)
• Ink: Memento Tuxedo Black 
• Copics: Clothes: BG13, BG11, BG10, E21, E23, YR24. Face/Straw: E51, E50, E21, R20, Y21, Y26 Wood: E25, E23
• Misc.: Foam Tape, White Gel Pen

Hello Deer

 Hi everyone and happy Thursday!

Today I am sharing a card that I made with the one of the new images released this month from 

All Dressed Up Stamps.

For my card, I used the new image called Deer Hug. Isn't that the sweetest image ever? 

I started by making my card base using some kraft cardstock, covering it with a piece of floral patterned paper and adding a piece of kraft cardstock on top. I printed out my Deer Hug image onto a piece of white hammermill cardstock and colored it with my Copic markers. Once I had it colored. I rounded the bottom corners and used a border punch along the top edge. I added some ribbon and then popped up my image panel with foam tape onto my card front. I used my computer to create my greeting, trimmed it up and added it under my bow. I love how this card turned out!

Copic Colors Used:

--Skin: E50, E51, E21--

--Hair: E42, E43, E44--

--Deer: E40, E42, E43, E49--

--Flowers: V91, V93, RV91, RV93, RV95, BG72, BG70, V95, B32--

--Dress/Wings: V91, V95, V000, B0000

--Shadow: C1, C0, C00--

Thank you so much for stopping by my blog today and taking a look at my latest creation!

I really appreciate it!

I hope you have a great crafty day!

Products Used:

• Cardstock: White (Hammermill), Kraft (Pen Gear)
• Patterned Paper: Darling Deerest (The Paper Studio)
• Stamp: Deer Hug (All Dress Up Stamps)
• Misc.: Offray Ribbon, Foam Tape, Corner Rounder, Clear Wink Of Stella, White Gel Pen, Floral Lace Border Punch

Halloween Wishes!

 Hi everyone!

I hope your day is off to a great start!

Today I am sharing a fun Halloween card that I created using a super cute image from

Digi Doodle Studios called Jazzy Jette & Crew.

This card was so super simple!

I created my cardbase using some black cardstock and layered two different patterned papers on a diagonal on top. To seperate the layers, I cut another piece of patterned paper  & added a spider web border to each side. I printed out Jazzy Jette & Crew onto some white cardstock and colored the image in with my Copic markers. Once I had it colored in, I fussy cut the image and popped it up onto a black oval with foam tape. I added it to my card and popped up my greeting below it. I added some star confetti along with some Nuvo drops to complete my card.

They look like they are ready to go out and have a spooky good time huh?

So incredibly cute!

Copic Markers Used:

--Pumpkins: YR18, YR16, YR14, YR12, Y11, R35, R32, E27, E23--

--Cat: N6, N4, N2, V17, V15, V12, YG05, YG03, R20--

--Bats/Spider: C4, C2, R20--

Thank you so much for stopping by my blog today and taking a look at my latest creation!

I really do appreciate it!

I hope you have a great crafty day!

Products Used:

• Cardstock: White (Hammermill), Black (Recollections)
• Patterned Paper: Happy Haunting (Doodlebug)
• Digital Stamp: Jazzy Jette & Crew (Digi Doodle Stamps)
• Sentiment: Reverse Spooky Salutations (Simon Says Stamp)
• Dies: Oblong Doily Frames (Daice), Fishtail Foundations (MFT)
• Misc.: Confetti Stars, Yellow Nuvo, Black Nuvo, Spider Web Border Punch, White Gel Pen, Gold Gel Pen, Copic Sketch Markers

Sweet & Spooky

 Hi everyone!

I hope your day is off to a fabulous start!

Today I have a fun little treat box to share with you that I made using older products from my stash as well as some brand new stamps that are getting released today from Ink N Splatter!

I started by creating my box using a die from Jaded Blossom and some black cardstock. I cut out a zig zag circle using some patterned paper from Ink N Splatter, Spooky Nights 6x6. I layered a piece of light black graph paper on top and then popped it onto my box with foam tape. I stamped that adorable image from the new stamp set from Ink N Splatter called Sweet & Spooky with some black memento ink and colored it with my Copic markers. Once I had it colored, I used the coordinating die to cut it out and popped it up onto my circle with more foam tape. I stamped my greeting with black Memento ink onto a scrap piece of the graph paper and added that to the top half of my box. I used more paper from the Spooky Nights 6x6 and a bow die to create that fun bow and added some confetti stars to complete my box.

Isn't it so cute? I love those little kitty cats!

Copic Colors Used:

--Cat 1: C3, C2, C1, R20, R00, C6, C5, C3, V15, V12, Y28--

--Cat 2: YR27, YR24, YR21, YR30, Y21, R20, R00--

--Cat 3: C2, C3, C5, C6, R20, R00--

--Spider: C3, C5--

--Pumpkin: YR12, YR14, YR18, G82, G94, R32--

Thank you so much for stopping by my blog today and taking a look at my latest creation!
I really appreciate it!

I hope you have a great crafty day!

Ink N Splatter Products Used:

• Sweet & Spooky Stamps
• Sweet & Spooky Coordinating Dies
• Spooky Nights 6x6 Paper Pad

Other Products Used:

• Cardstock: Black (Recollections), White (Hammermill)
• Patterned Paper: Floral Graph (Doodlebug)
• Dies: Gable Box Die & Bow Dies (Jaded Blossom), Stitched Circle & Zig Zag Circle (Pink & Main)
• Misc.: White Gel Pen, Foam Tape, Confetti Stars

Trick Or Treat!

 Hi everyone!

I hope your day is off to a wonderful start!

I'm excited to be back today as a guest designer for Jaded Blossom!

I know I am not the only Jaded Blossom fan that LOVES the cuteness and possibilities you can get from the Gnome Dies that they have! When I was thinking of what to make for today, I knew the Gnome Dies were just what I wanted for this adorable little Trick Or Treat bag.

How fun!

I started by using the Goody Bag Die and some black cardstock to create my little bag. I added some gray and black patterned paper, set the bag aside & got to work on my little Gnome.

I used the Gnome Dies to create his little body and the Gnome Dies: Fall Add Ons to create his hat & then added him to the front of the bag. To create the lollipop, I used a peppermint enamel dot and added it to a strip of white cardstock. For the sign, I stamped my greeting from the Halloween Poop 2 stamp set onto a piece of green patterned paper and added that to a strip of white cardstock that I lightly inked with some distress inks. I added a little orange bow to my sign and completed my bag with some bats from the Halloween Banner Dies.

So cute right??

Thanks so much for stopping by today!

I really appreciate it!

I hope you have a great crafty day!

Products Used:

• Jaded Blossom: Gnome Dies, Gnome Dies: Fall Add Ons, Halloween Banner Dies, Goody Bag Die, Halloween Poop 2
• Cardstock: Black (Recollections), Peach (Paper Accents)
• Patterned Paper: Floral Graph & Swiss Dots (Doodlebug)
• Copics: C00, C0, C2
• Misc.: Foam Tape, Peppermint Twist Shape Sprinkles, Crochet Thread

Trick Or Treat

 Hi everyone!

I hope your day is off to a great start!

Today I am sharing a Halloween themed card that I created using a new image from

Digi Doodle Studios called Princess Paislee.

This little cutie is ready to go and get some candy lol!

I printed Princess Paislee onto a piece of white Hammermill cardstock and colored her with my Copic markers. I used a stitched die to cut her out and placed her on top of a piece of gray cardstock. I created my cardbase from some more of the gray cardstock and added some patterned papers from Doodlebug Designs on top. I popped up my image panel with foam tape and added my greeting. I completed my card with some confetti stars along with some clear Wink of Stella shimmer.

Copic Colors Used:

--Skin: E50, E51, E21, R20, R00--

--Hair: E31, E34, E37--

--Pumpkin: YR12, YR14, E27, YR07, V01, BG11--

--Crown/Wand" Y11, Y23, Y26--

--Dress: RV10, RV00, RV000, C0, C2--

--Roses: RV52, RV32, G20, G43--

Thank you so much for stopping by my blog today!

I appreciate it so much!

I hope you have a great crafty day!

Products Used:

• Cardstock: Gray (Recollections), White (Hammermill)
• Patterned Paper: Swiss Dot Rainbow & Booville (Doodlebug)
• Image: Princess Paislee (Digi Doodle Studios)
• Dies: Stitched Rectangular Frame Dies (MCT)
• Misc.: Foam Tape, Clear Wink Of Stella, Glossy accents, Confetti Stars

Gnome Doubt....

Hi everyone!!

I hope you are all having a fabulous Sunday!

I'm happy to announce that I will be a guest designer for Jaded Blossom during the month of September! Yay!!

A new challenge with an Anything Goes theme started today over at the Jaded Blossom Blog!!

Of course, you do need to use some of your JB products to participate.

You can read all the rules for the challenge over at their blog.

Here is a look at what I created to share with you:

One of my favorite JB products is the fun Candy Bar Slider Die and I really wanted to pair it up with a cute little gnome. Making it is super simple, here's how I did it. I started by using the Candy Bar Slider Die and some white cardstock to create my box. I layered a piece of bright green patterned paper on top, centering it the best that I could. I built my little girl gnome by using the Girl Gnome Dies as well as the Gnome Dies: Spring Add Ons. I also used the Bow Dies to add a tiny little bow to her hat. I stamped my sentiment from the Whimsical Gnomes stamp set and used the Mini Tag Dies 3 to cut it out. I placed my greeting onto my box and added my gnome right above it with some liquid glue. I thought she need a balloon so I cut one out using the Balloon Dies and popped it up with some foam tape. I finished my project with some streamers from the Banner Dies as well as some sequins and Nuvo drops.

So cute and quite a bit of dimension!!!

Inside holds a yummy chocolate bar!!!

Be sure to check out the Jaded Blossom blog to see what the DT made, they never disappoint! 

I hope you will play along with us, I would love to see what you make!

Thanks so much for stopping by today!

I really appreciate it!

I hope you have a great crafty day!

Jaded Blossom Products Used:

• Whimsical Gnomes
• Bow Dies
• Candy Bar Slider Die
• Girl Gnome Dies
• Gnome Dies: Spring Add Ons
• Balloon Dies
• Banner Dies
• Mini Tag Dies 3

Other Products Used:

• Cardstock: White (Georgia Pacific), Peach (Paper Accents)
• Patterned Paper: Cute & Crafty, Hey Cupcake & Floral Graph (Doodlebug)
• Misc.: Foam Tape, Sequins, White Nuvo Drops